XS series operating manual
XS user manual v0.55 - 41 -
6 Unit configuration
After switching on or returning to the initialization menu, press the [SETUP] function key of the Z4
area. Then the LCD screen displays as follows:
Fig 6.1
With the control keypad:
With the UP and DOWN arrow keys, move the reverse video line and go into modification mode by
pressing on the RIGHT arrow key or on the ENTER key (key at the center of the control keyboard).
Scroll the possible selections with the UP and DOWN arrow keys, and then enter the choice with
the validation key.
Language selection
All the messages on the LCD screen can be displayed in several languages (French, English,
German, and Spanish). Display the required language with the UP/DOWN arrows, and then enter.
The unit goes back to its initialization menu.
Fig 6.2
To Next Page
Loading...
Need help?
General
