XS series operating manual
XS user manual v0.55 - 80 -
10 Sequence mode operation (SXS)
Any measurement function in the XS series is independent from the others.
The operator can decide about the parameter values and how to operate.
However the need to automate the electrical safety test request the capability to link the insulation, hipot
and ground continuity tests with parameters according to standards or to internal company procedure.
The sequence mode gives the possibility to define and to link automatically all the tests according to the
operator need.
Measurement function setting
To access to measurement functions, press the [FUNCT] key from the initialization menu, then
press on the selected function key.
Fig 10.1
Function not defined on the first screen, can be accessible with the [NEXT] key.
Sequence setting
Press on the [SEQ.] key from the initialization menu to obtain the next screen.
Fig 10.2
To Next Page
Loading...