144
Adjusting sound quality
How to operate the unit with an optional 5.1 ch decoder/AV matrix unit connected
Touch a switch from to
.
● The preset pattern stored in memory
will be retrieved.
● Touch after making
settings. The PEQ mode adjustments
will be saved and the system will return
to the previous operation screen.
Frequency characteristics inside the vehicle can be measured and displayed on the display.
The measurement result can be referred to when adjusting the parametric equalizer. These
measurements are also necessary to automatically correct parametric equalizer settings using
E-iSERV sound effect customizations.
Connect the accessory
microphone with a optional 5.1 ch
decoder/AV matrix unit.
● Align the microphone with the actual
ear position and attach it to the
headrest or other appropriate fixture.
(Attach the microphone using tape or
string.)
To measure all channels at the same time
Touch briefly (less
than 1 second).
● After touching the switch, a 10-second
countdown begins. Leave the vehicle
during that time.
● Pink noise will be output from the
speakers and measurement of the
frequency characteristics will start.
● When measurement is complete, the
measurement results will appear on the
display.
Selecting a PEQ pattern from memory
EQ1
EQ5
BACK
Measuring/Displaying frequency characteristics
MEASURE
To Next Page
Loading...
Need help?
General
