146
Adjusting sound quality
How to operate the unit with an optional 5.1 ch decoder/AV matrix unit connected
Adjusting POS (Positioning selector)
Sound localization can be adjusted according to the number and position of passengers in
order to obtain optimum acoustic effects.
A seat's sound localization can be adjusted simply by touching a switch.
Press in the sound
adjustment screen.
Touch one of the seat images
displayed in the POSITION setting
screen to switch the sound
localization for that seat.
● The selected position will be indicated
in a yellow box. Touch the seat again to
cancel the selection. The four positions
shown in the table below can be set.
● Touch to cancel all settings.
● Touch after making
settings. The position will be saved and
the system will return to the previous
operation screen.
Touch switch Function Touch switch Function
Acoustics optimized for
left side seat
Acoustics optimized for
both front seats
Acoustics optimized for
right side seat
Acoustics optimized for
rear seats
POS
OFF
BACK
●You cannot set POS (Positioning selector) at the same time as adjusting the
balance (next page).
●This product is configured for vehicles with left-hand drive.
To Next Page
Loading...
Need help?
General
