Eclipse AVN7000 - Selecting Radio Stations; Manual Selection; Automatic Selection; Selection Using Preset Switches

64
How to operate the tuner
How to use the AM/FM radio
Selecting radio stations
Press or .
● Pressing the switch once moves the frequency one step up or down. (One step on the
AM band is 10kHz. One step on the FM band is 0.2MHz)
● (up) : Raises the frequency
(down) : Lowers the frequency
Press and hold or until you hear a beep.
● The station that is closest to the current frequency will be searched for automatically,
and searching will stop when the station is received. To stop the search before a
station is found, press the button again.
Touch a preset switch that already has a station recorded.
● Refer to "Saving radio stations" on 66 for details on saving stations.
Manual selection
Automatic selection
Selection using preset switches
If the reception for a particular station is weak in the area you are in, the automatic
selection may not work.