145
5.1 ch
decoder
● Touch to cancel measurement.
To measure each channel separately
Insert the “Memory Stick Duo”.
Touch for more than 2
seconds, until you hear a beep.
● After touching the switch, a 10-second
count down begins. Leave the vehicle
during that time.
● Pink noise will be output from the
speakers and measurement of the
frequency characteristics will start.
● When measurement is complete, the
measurement results will appear on the
display. Measurement results for each
channel can be displayed by selecting
the desired channel.
● Measurements can be written to a
“Memory Stick Duo” and corrected
automatically using the E-iSERV
website.
● Touch to cancel measurement.
CANCEL
MEASURE
CANCEL
Because this function is designed to make measurement of frequency
characteristics easier, slight errors may occur in the measurement data under
some circumstances. The measurements obtained are not equivalent to the
precise measurements that can be made by professional measuring devices.
●Close all doors and windows while measurement is in progress.
●Sound quality data is written to the “Memory Stick Duo” as follows.
●The folders and files that are required for E-iSERV sound effect customizations
are created automatically when the data is written to the “Memory Stick Duo”.
●Select a file in when uploading sound quality data to the E-iSERV
website.
MSFTEN
SOUND
Adjustment mode
305*000.ftn
Three digit numbe
File extension
MSFTEN SOUND
To Next Page
Loading...
Need help?
General
