174
Important Points
For reference
Symptom Possible reason Corrective action
Neither video nor audio is output.
The vehicle ignition switch has not
been turned on.
Turn the vehicle ignition switch to
ACC or ON.
The connection cord is not
completely connected.
Check the connections to each
connection cord.
There is a point of light on the
display.
At least 99. 99% of the pixels on
the LCD panel are effective, but it is
possible that 0. 01% of the pixels
may not light or may stay lighted.
This is not a defect, so please use
the deck in this condition.
The Audio screen is distorted by
electrical noise.
Are electrical devices that generate
electrical noise being used in the
vicinity of the unit?
For example, devices generating
high voltage (such as those that
generate negative ions) or high
frequency electromagnetic waves
(cell phones or two-way radios)
Use such equipment as far away
from the unit as possible.
If such equipment continues to
affect the unit, even from a
distance, refrain from using such
equipment while the unit is in
operation.
To Next Page
Loading...
Need help?
General
