Eclipse AVN726E - Adjusting sound quality; Setting low pass filter; Setting Loudness

130
130
Adjusting sound quality
Operation
■ Setting low pass filter
The low pass filter cuts out frequencies
higher than the set frequency (high-band
frequencies) and allows lower frequencies
(low-band frequencies) to pass.
● After completing the setting, touch
to store the setting and return to the
immediately preceding screen.
You can correct for the lack of satisfaction at
high and low frequencies when listening at
low volume to give better modulated sound.
● On completion, touch to store the
setting and return to the immediately
preceding screen.
1
Touch or .
Setting Loudness
1
Touch on the Settings
screen.
ON OFF
Done
Loudness
Done