Operation and parameterization 48
Manual econ sens3 Version 3.0
You gain access to the submenus by entering your user name and password. Default values are as
follows:
User name: user Password: pass
After login you will be forwarded to the submenus and taken automatically to the Date submenu.
General information on saving settings
The entire configuration process of the econ sens3 is divided into multiple menus and various input
windows.
There is an Accept button on each menu page that is used to save your input on the respective page;
i.e., if you switch to a different menu page without pressing Accept, your entries are reset to the default
values. To save your settings permanently at the end of the entire configuration process, select Save
from the navigation bar on the right and press Save again to confirm. A saved change is confirmed
with the message: Save under <Date><Time>.
The message “Don’t forget to save your changes permanently” will display on each menu page to
remind you to save your settings permanently.
Date submenu
The Date submenu is used to configure the time and date settings of the econ sens3.
The following options are available for this:
To Next Page
Loading...
Need help?
General