Econ sens3 User Manual

Operation and parameterization 50
Manual econ sens3 Version 3.0
Network submenu
In the Network submenu you can make the basic network settings of the econ sens3.
Displayed are the network settings according to the DHCP server, if the IP address assignment was
made via DHCP. These include the choice between manual assignment of the IP address or
assignment of the address via DHCP server. The factory default setting is the function Obtain IP
address via DHCP if possible.
If the instrument does not detect a DHCP server, the values are taken automatically from the fields IP
address, subnet mask, default gateway, DNS server, and network device name. The values shown in
Fig. 43 represent the default settings of the instrument.
Figure 43: Start screen of the network menu

Econ sens3 Specifications

General

Brand	Econ
Model	sens3
Category	Measuring Instruments
Language	English