Introduction
1.4 EST2 System Operations Manual
Documentation conventions
Important notices
Notices throughout this manual inform the reader of practices
and conditions, which will affect physical safety, occupant
safety, equipment performance, and time consumption. Notices
appear as warnings, cautions, and notes.
Warnings
Warnings are posted when injury or loss of life may occur
through the neglect of safe practices and conditions.
WARNING: Testing the system disables the alarm contact. The
system will not notify the fire department in the event of a fire
alarm condition during a test. See the system administrator for
detailed information.
Cautions
Cautions are posted in the manual to prevent damage to the
equipment. A typical caution concerns the prevention of
electrostatic discharge (ESD).
Caution: Observe static-sensitive handling practices.
Notes
Notes instruct the reader to avoid practices or conditions, which
may result in wasted time and effort. For example, a download
will not work unless the programmer disconnects the printer
from the RS-232 port on the Main Controller Module (MCM).
Note: Disconnect the printer when downloading to the MCM.
System parameters
2-LCD keypad entries and fault messages require knowledge of
the system parameters.
Keypad entry parameters
To understand the parameters for 2-LCD keypad entries, see
Making keypad entries in Operating panel devices.
Fault message parameters
To understand the parameters for reading fault messages, see
System service procedures in the Installation and Service
Manual.
To Next Page
Loading...
