EDWARDS SYSTEMS TECHNOLOGY EST2 - Disabling an RS-485 Channel; Disabling a Panel Address; Disabling an Action; Disabling a Sequence

Operating panel devices
EST2 System Operations Manual 2.29
Disabling an RS-485 Channel
To disable RS-485 communications on channel 0:
1. At the 2-LCD, press Disable.
2. Enter a level 2, or 3 password.
3. Enter 4 to select RS-485 communications channels.
4. Enter 0 to disable the channel 0.
To disable RS-485 communications on channel 1:
1. At the 2-LCD, press Disable.
2. Enter a level 2, or 3 password.
3. Enter 4 to select RS-485 communications channels (data
line).
4. Enter 1 to disable the channel 1.
Disabling a panel address
To disable a panel:
1. At the 2-LCD, press Disable.
2. Enter a level 2, or 3 password.
3. Enter 5 to select panel.
4. Enter the panel address (pp).
Disabling an action
To disable an action:
1. At the 2-LCD, press Disable.
2. Enter a level 2, or 3 password.
3. Enter 6 to select action.
4. Enter the action number (nnnn).
Disabling a sequence
To disable a sequence:
1. At the 2-LCD, press Disable.
2. Enter a level 2, or 3 password.
3. Enter 7 to select sequence.
4. Enter the sequence number (nnnn).