EDWARDS SYSTEMS TECHNOLOGY EST2 - Restoring System Functions; Restoring an Output; Restoring an Action; Restoring a Sequence

Operating panel devices
EST2 System Operations Manual 2.33
Restoring system functions
This section explains the functions of the Restore switch. In the
Restore mode, the 2-LCD offers the following menu options:
• Outputs
• Actions
• Sequences
Note: For a detailed explanation about the parameters of keypad
entries, see Making keypad entries, earlier in this chapter.
Restoring an output
To restore an output:
1. At the 2-LCD, press Restore.
2. Enter a level 1, 2, or 3 password.
3. Press 1 to select Output.
4. Enter the priority and address for the output device being
restored (PPppzz).
Restoring an action
To restore an action:
1. At the 2-LCD, press Restore.
2. Enter a level 1, 2, or 3 password.
3. Press 2 to select Action.
4. Enter the number of the action being restored (nnnn).
Restoring a sequence
To restore a sequence:
1. At the 2-LCD, press Restore.
2. Enter a level 1, 2, or 3 password.
3. Press 3 to select Sequence.
4. Enter the number of the sequence being restored (nnnn).