EDWARDS SYSTEMS TECHNOLOGY EST2 - Enabling an RS-485 Channel; Enabling a Panel Address; Enabling an Action; Enabling a Sequence

Operating panel devices
2.26 EST2 System Operations Manual
Enabling an RS-485 channel
To enable RS-485 communications on channel 0:
1. At the 2-LCD, press Enable.
2. Enter a level 2 or 3 password.
3. Enter 4 to select RS-485 communications channels.
4. Enter 0 to enable channel 0.
To enable RS-485 communications on channel 1:
1. At the 2-LCD, press Enable.
2. Enter a level 2 or 3 password.
3. Enter 4 to select RS-485 communications channels.
4. Enter 1 to enable channel 1.
Enabling a panel address
To enable a panel:
1. At the 2-LCD, press Enable.
2. Enter a level 2 or 3 password.
3. Enter 5 to select panel.
4. Enter the panel address (pp).
Enabling an action
To enable an action:
1. At the 2-LCD, press Enable.
2. Enter a level 2 or 3 password.
3. Enter 6 to select action.
4. Enter the action number (nnnn).
Enabling a sequence
To enable a sequence:
1. At the 2-LCD, press Enable.
2. Enter a level 2 or 3 password.
3. Enter 7 to select sequence.
4. Enter the sequence number (nnnn).