Operating panel devices
2.28 EST2 System Operations Manual
Disabling system functions
This section explains the functions of the Disable switch. In the
Disable mode, the 2-LCD offers the following menu options:
• Zones
• Messages
• Time Controls
• RS-485 Channels
• Panels
• Actions
• Sequences
• Laptop Computer Downloading
• Mapping
Note: For a detailed explanation about the parameters of keypad
entries, see Making keypad entries, earlier in this chapter.
Disabling a zone
To disable a zone:
1. At the 2-LCD, press Disable.
2. Enter a level 2, or 3 password.
3. Enter 1 to select zone.
4. Enter the device address (ppzz).
Disabling a message
To disable a message:
1. At the 2-LCD, press Disable.
2. Enter a level 2, or 3 password.
3. Enter 2 to select message.
4. Enter the device address (ppzz).
Disabling a time control
To disable a time control:
1. At the 2-LCD, press Disable.
2. Enter a level 2, or 3 password.
3. Enter 3 to select time control.
4. Enter the time control number (tttt).
To Next Page
Loading...