EDWARDS SYSTEMS TECHNOLOGY EST2 - Programming system functions

Operating panel devices
2.22 EST2 System Operations Manual
Programming system functions
This section explains the functions of the Program switch. In the
Program mode, the 2-LCD offers the following menu options:
•Date
•Time
• Password
• RS-485 Port Communications
•System Restart
• Reconfigure (Autoprogram)
Note: For a detailed explanation about the parameters of keypad
entries, see Making keypad entries, earlier in this chapter.
Setting the system date
To set the system date:
1. At the 2-LCD, press Program.
2. Press 1 to select Date.
3. Enter a level 3 password.
4. Enter the year (yyyy).
5. Enter the month (mm).
6. Enter the day (dd).
7. Enter the day of the week (Sun=01).
Setting the system time
To set the system time:
1. At the 2-LCD, press Program.
2. Press 2 to select Time.
3. Enter a level 3 password.
4. Enter the time (hhmmss).
Changing system passwords
To change a system password:
1. At the 2-LCD, press Program.
2. Press 3 to select Password.
3. Enter a level 3 password.
4. Change the password level (1, 2, or 3).