Operating remote devices
EST2 System Operations Manual 3.9
Reading and operating SAN annunciators
SAN annunciators provide point status indication and switching
functions at a location remote from the fire alarm control panel.
Each SAN annunciator requires a SAN-CPU. This section
discusses the indicators and controls of the following SAN
annunciators:
• 2-SANCOM
•SLU-16
•SWU-8(/3)
•SHO-4
• ISP-96(-2 or -3)
2-SANCOM
The 2-SANCOM Remote Network Control module provides
basic network indicators and controls in a SAN series package.
STDOP015.CDR
ALARM
SILENCE
TROUBLE
SILENCE
DRILL
LAMP TEST
RESET
DISABLE
ENABLE
POWER
ALARM
SUPERVISORY
TROUBLE
SECURITY
Figure 3-6: 2-SANCOM
To Next Page
Loading...
