Content
EST2 System Operations Manual i
Content
Important information • ii
Getting the most out of this manual • iii
Chapter 1 Introduction • 1.1
Using this manual • 1.2
Documentation conventions • 1.4
Chapter 2 Operating panel devices • 2.1
Operating the 2-LCD • 2.3
Reading 2-LCD messages • 2.8
Acknowledging prioritized messages • 2.10
Responding to off-normal conditions • 2.11
Initiating a drill test • 2.15
Checking system status • 2.16
Programming system functions • 2.22
Enabling system functions • 2.25
Disabling system functions • 2.28
Activating system functions • 2.31
Restoring system functions • 2.33
Generating reports • 2.34
Testing system functions • 2.38
Operating LED/switch modules • 2.40
Operating the 2-MIC • 2.42
Operating the 2-TEL • 2.44
Recording voice messages • 2.45
Chapter 3 Operating remote devices • 3.1
Operating remote alphanumeric annunciators • 3.2
Reading and operating SAN annunciators • 3.9
Chapter 4 Operating peripheral devices • 4.1
PT-1S Printer • 4.2
RSAN-PRT Printer • 4.4
Appendix A Operator instructions • A.1
Posting operator instructions • A.2
Index • Z.1
To Next Page
Loading...
