EDWARDS SYSTEMS TECHNOLOGY EST2 - Page 89

Index
EST2 System Operations Manual Z.3
LEDs (light emitting diodes) (continued)
SIGA-MDM • 2.45
SLU-16 • 3.11
SWU-8(/3) • 3.15–3.16
levels, password • 2.23
light emitting diodes. See LEDs
Lin1 indication • 2.18
liquid crystal display. See LCD messages
local silence • 2.4
M
maintenance messages • 2.13
making keypad entries • 2.6–2.7
Map1 indication • 2.18
mapping
disabling of • 2.30
enabling of • 2.27
master handset, 2-TEL • 2.44
menus
Activate • 2.31–2.32
Disable • 2.28–2.30
Enable • 2.25–2.27
Program • 2.22–2.24
Reports • 2.34–2.37
Restore • 2.33
Status • 2.16–2.21
message review switches, 2-LCD • 2.5
Message select switch, SIGA-MDM • 2.46
messages
disabling of • 2.28
enabling of • 2.25
maintenance • 2.13
priorities of • 2.10
voice • 2.45–2.46
waiting • 2.8
MIC/Line in, SIGA-MDM • 2.46
MIC/Line select switch, SIGA-MDM • 2.46
microphone module. See 2-MIC
monitor points • 2.12–2.13
Mpg1 indication • 2.18
MPw1 indication • 2.17
N
Normal LED, SIGA-MDM • 2.45
O
operating switches
on LED/switch modules • 2.40–2.41
on the 2-CMDN(-C) • 3.5
on the 2-LCD • 2.4–2.5
on the 2-LSRA(-C) • 3.5
on the 2-MIC • 2.42–2.43
operating switches (continued)
on the 2-SANCOM • 3.10
on the 2-SMDN(-C) • 3.5
on the 2-TEL • 2.44
on the ISP-96-2 • 3.15–3.16
on the ISP-96-3 • 3.15–3.16
on the PT-1S • 4.2–4.3
on the RSAN-PRT • 4.4–4.5
on the SAN-MICII • 3.17
on the SHO-4 • 3.15–3.16
on the SIGA-MDM • 2.46
on the SWU-8(/3) • 3.15–3.16
operator responses
to fire alarms • 2.11
to maintenance messages • 2.13
to monitor points • 2.12–2.13
to supervisory conditions • 2.11–2.12
to trouble conditions • 2.12
to verification messages • 2.13–2.14
outputs
activation of • 2.31
restoration of • 2.33
P
Page to Alert switch, 2-MIC • 2.42
Page to Evac switch, 2-MIC • 2.42
panel addresses • 2.23
disabling of • 2.29
enabling of • 2.26
passwords, system • 2.22–2.23
Phone Call-In Silenced LED, 2-TEL • 2.44
Phone to Alert switch, 2-MIC • 2.42, 2.44
Phone to Evac switch, 2-MIC • 2.42, 2.44
Play LED, SIGA-MDM • 2.45
Play switch, SIGA-MDM • 2.46
playing voice messages • 2.46
Prg1 indication • 2.18
printer
PT-1S • 4.2–4.3
RSAN-PRT • 4.4–4.5
printing history reports • 2.37
printing sensitivity reports • 2.35
priorities, message • 2.10
privileges, password • 2.23
Prn1 indication • 2.17
programming system functions. See
changing system passwords;
programming the communications class;
reconfiguring SLCs; setting the system
date; setting the system time. See also
under CPU; history reports; SLC
programming the communications class •
2.23
PT-1S • 4.2–4.3