TROUBLESHOOTING 119
Printing (continued)
Print quality is poor. Possibly one of the following:
• A file or application problem
• A missing or outdated printer
description file
• The application cannot find the
appropriate printer description file
• The system is out of calibration
1 Print a E-42B Test Page.
2 If the quality of the E-42B Test Page is good, the error
condition may be a file or application problem.
3 Make sure that the appropriate printer description file
is installed. (For details, see Printing, which is part of the
user documentation set.)
If the user can print the E-42B Test Page, but cannot print a job from a computer on the network, make sure that the network
administrator has:
• Checked all components of the network, including cables, connectors, terminators, network adapter boards, and network drivers.
• Activated the network and used it to communicate with other printers.
• Confirmed that the applicable network settings in Setup (such as an IP address, Subnet mask, and Gateway address) match the settings
used in the network.
NOTE: EPS file generation is not completely standardized among applications. Some users may encounter problems while printing certain
EPS files.
Symptom Possible cause Suggested action
To Next Page
Loading...
Need help?
General
