7. SYSTEM INSTALLATION
7.1 TOOLS NEEDED FOR INSTALLATION
• Hand truck with all-terrain tires
• Tape measure
• Drill and drill bits (5/15)
• Wire strippers
• Small flathead screwdriver
• Torque wrench
• M8 Hex
• M5 Hex
• Multimeter
• Precision screwdriver
• Medium flat head screwdriver for PV
connection
• 14 mm or 9/16 socket for anchors
• 13 mm or 1/2 socket for lag screws
• Level
• Channel Locks
• Self-tapping screws (2)
• Lineman’s Pliers, rabbit ears or side
cutters
• Heavy duty wood screws (4)—if
anchoring in wood OR Hammer Drill
and masonry bit (9/16)— if anchoring
in concrete
To Next Page
Loading...
