EG4 FLEXBOSS21 - Page 54

49
Peak Shaving
• Grid Peak-Shaving
Enable or disable grid peak-shaving.
• Grid Peak-Shaving Power(kW)/Grid Peak-Shaving Power2(kW)
Set the maximum amount of power that will be drawn from the grid.
• Start Peak-Shaving Volt 1(V)/Start Peak-Shaving Volt 2(V)
Set the starting point of peak-shaving when using voltage setpoints for batteries.
• Start Peak-Shaving SOC 1(%)/Start Peak-Shaving SOC 2(%)
Set the starting point of peak-shaving when using SOC setpoints for batteries.
• T1/T2 Start
Set the start time of peak-shaving depending on SOC/voltage as configured above.
• T1/T2 End
Set the end time of peak-shaving depending on SOC/voltage as configured above