EasyManua.ls Logo

EG4 FLEXBOSS21 - Page 56

EG4 FLEXBOSS21
70 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
51
PV Charge Priority:
The orde
r of priority for solar power usage will be Battery -->Load -->Grid. During the PV Charge
Priorityperiod, loads are first supplied power from the grid. If there is excess solar power after
charging batteries, the excess solar will power the loads along with grid power.
PV Charge Priority
Enable or disable the battery priority/PV Charge Priority working mode.
PV Charge Power(kW)
Set the maximum amount of power to charge the batteries from solar.
PV Charge Priority Stop SOC(%)
Set the stop point for Battery Priority according to SOC%.
Battery Priority Stop Volt(V)
Set the stop point for Battery Priority according to voltage.
T1/T2/T3
Set up to 3 different start and stop times for the PV Charge Priority working mode.
Off-Grid Mode
Set to disable
Solar power will be used to charge
the battery bank first. If there is
extra power, it will be used to take
the load.

Table of Contents

Related product manuals