Eizo DuraVision FDF4627W-IP

27
Chapter 2 Conguring from the monitor screen
3. Select “Apply”.
The setting complete screen is displayed. Select “OK”.
Attention
• Time zones differ according to the sales region. This needs to be set.
• If the time zone has been changed, daylight saving time will be turned off. (For details, refer to “Summer Time
(DST)” (page 27) in the next section).
Note
• If the main power switch is turned off or the power cord is unplugged for one week or longer, the monitor’s
time and date will no longer be displayed accurately. In such a case, set the date and time again.
Summer Time (DST)
Apply or cancel the summer time setting (DST).
1
2
1. Congure the items.
Item Detail Setting range
Summer Time (DST) Applies or cancels the summer time setting.
Set to “On” to apply to summer time immediately.
Set to “Off” to not apply to summer time.
Set to “Auto” to apply to summer time automatically
during the period designated by the start / end dates
and times.
On / Off / Auto
2. Select “Apply”.
The setting complete screen is displayed. Select “OK”.