Eizo DuraVision FDF4627W-IP

28
Chapter 2 Conguring from the monitor screen
Network
Set network information.
2
3
1
1
1
2
2
1. Select “Network Settings”, “DNS Settings” or “NTP Settings”.
2. Congure the items.
Item Detail Setting range
Network Settings Select the IP address setting method. IP Setting Method DHCP / Manual
Setting
If “Manual Setting” is selected, set the IP
address, subnet mask and gateway.
IP Address,
Subnet Mask,
Gateway
*1
0.0.0.0 to
255.255.255.255
DNS Settings Set the DNS.
(When “IP Address” of “Network Settings” is set
to “Manual Setting”.)
DNS Auto / Manual
If you selected “Manual”, set the primary server
address and the secondary server address.
Primary Server
Address,
Secondary Server
Address
0.0.0.0 to
255.255.255.255
NTP Settings Set whether or not to use an NTP server. NTP On / Off
If you selected “On”, set the NTP server
address.
Server Address Alphanumeric
characters and
symbols
*1 If your network environment does not include a gateway, you do not need to set the “Gateway”
address. Use the default setting as is, or set as “0.0.0.0”.
3. Select “Apply”.
The setting complete screen is displayed. Select “OK”.