E L A N H O M E S Y S T E M S S1616A AMPLIFIER MODE
© ELAN Home Systems 2012 | All rights reserved.
Fault Menu
If a channel is FAULTED the following screen will show in the display.
This shows the faulted channel’s number as well as how many times the channel has faulted due
to high temperature and low impedance combined. It also shows high temperature warnings
separately. The end user can attempt to clear the fault by pressing the UP or DOWN arrows.
If the end user is unable to clear the fault they should contact the dealer for assistance. It is not
necessary to stop using the amplifier in the meantime; continuing to use the amplifier WILL NOT
cause additional damage.
The speaker wires should not be connected to different amplifier channels without first checking for
shorts or low impedance on the speakers.
To Next Page
