E L A N H O M E S Y S T E M S S1616A AMPLIFIER MODE
© ELAN Home Systems 2012 | All rights reserved.
Volume Menu (Continued)
Trigger ON is the factory default.
The TRIGGER options are:
• On: The selected channel is on (consuming energy) and the trigger jack on the rear panel is
active.
• Off: The selected channel is off (NOT consuming energy) and the trigger jack on the rear panel is
not active.
• On/PS: The selected channel is off (NOT consuming energy) because the selected channel is in
Power Saving Mode even though the trigger jack on the rear panel is active.
When ACE (Automatic Clip Elimination) is active on the selected channel, ACE will be displayed
above Volume %.
(See "ACE Menu" on page 20.)
When AVR (Automatic Volume Reduction) is active, AVR is displayed above Volume %. AVR is
active whenever the amp is being overdriven. When AVR is active, the S1616A turns its volume
down until it is not being overdriven. The S1616A will return to its normal volume setting when it is
no longer being overdriven.
(See the Troubleshooting section for more information on AVR.)
Figure 2-7
Volume Menu with Ace
Figure 2-8
Volume Menu with AVR
To Next Page
