Aquastorm 200
Overview 1-11
Stainless Steel Wire Belt
Conveyor
The stainless steel wire belt conveyor is a
0.95 cm (
3
/
8
inch) pitch 50.8 cm (20 inch)
wide speed controlled wire mesh belt. The
conveyor belt transports product for
cleaning and drying in a single pass
through the Aquastorm 200™ system.
Note that the usable conveyor width is
limited to 46 cm (18 inches).
Optionally, the wire belt conveyor may be
configured with a 61 cm (24 inch) wide
belt; 56 cm (22 inch usable) width.
Noise Suppression Hood
The Noise Suppression Hood is standard with
the Aquastorm 200™. This feature incorporates
a 46 cm (18 inches) conveyor extension for easy
removal of product, and extends 15.24 cm (6)
inches past the exit end of the system's cabinet.
The noise level is equal to or better than 80 dBA
(maximum) measured 1 meter (3 feet) above the
floor and 1 meter (3 feet) from the Aquastorm
200™ enclosure.
To Next Page
Loading...