zipper tape to the lower fabric layer.
Return thread tension and stitch length to original
settings.
Sew
a
seam
the
entire
length
of
zipper
tape.
3 Stop the machine 2” (5 cm) before reaching the
slider, with needle in the fabric and raise the foot,
then unzip to clear a path for stitching.
9 Slider
2” (5 cm)
4 Remove fabric and close zipper. Take the upper
fabric layer and lay it flat over the zipper.
Baste the zipper tape to the upper fabric layer.
9 Basting
9 Zipper tape
11
12
To Next Page
Loading...
