l See "how to troubleshoot refrigeration system failure (rSF)alarms" on page 50
l See "how to troubleshoot temperature sensor alarms" on page 50
5.10 lights management
In the saving mode, the cooler lights are usually off.
For marketing purposes, light delay (Ld) can keep the cooler lights on for a short period after the ems controller switches to
the saving mode.
Marketing mode (Ar) can keep the lights on for the duration of the saving mode.
For more information about the parameters used in lights management:
l See "marketing mode (Ar)" on page 67
l See "lights delay (Ld)" on page 74
5.11 alarms
For alarm conditions, the ems controller displays the appropriate alarm code and, optionally, sounds an alarm buzzer.
Buzzer enable (b0) defines whether to sound a warning buzzer for alarm conditions.
Buzzer duration (b1) defines the duration of the buzzer for alarm conditions.
Note:
l
For door open alarms, the buzzer sounds regardless of the buzzer enable (b0) setting.
For more information about the parameters used in alarms:
l See "buzzer enable (b0)" on page 68
l See "buzzer duration (b1)" on page 68
ems25+ and ems25advanced / General Use
27 of 89
To Next Page
Loading...
