parameter settings.
l XML file with parameter settings.
9.4 how to install the drivers on Windows XP
Please note:
l Windows 7 and Windows Vista: Drivers install automatically by connecting the USBdocking cradle
For Windows XP, install the drivers as follows:
1.
Extract the ZIP file CDM20808.zip- from the files supplied by elstat which contain the Windows drivers for Windows
XP - and save into a suitable location.
For example, C:\Program Files\elstat\drivers.
2.
Insert the USB docking cradle into a spare USB port and ensure that the Windows New Hardware Found wizard starts
automatically.
3.
Select No, not this time as shown below.
4.
Select Install from a list or specific location (Advanced) and then click Next.
ems25+ and ems25advanced / General Use
55 of 89
To Next Page
Loading...
