EasyManua.ls Logo

Elstat ems25advanced - How to Troubleshoot Door Alarms (Door Switch Fitted); How to Troubleshoot Door Alarms (no Door Switch Fitted)

Default Icon
89 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8.3 how to troubleshoot door alarms (door switch fitted)
Door open alarms are triggered if the cooler door is left open for longer than the time defined by the alarm delay (Ad) para-
meter.
If the door is closed, and a door open alarm is registered, this may indicate problems with the cooler door or the door
switch.
For information about the alarm delay (Ad) parameter:
l See "alarm delay (Ad)" on page 66
Follow the chart to troubleshoot door open alarms on coolers with a door switch.
8.4 how to troubleshoot door alarms (no door switch fitted)
Door alarms with coolers without a door switch fitted usually indicates that the ems controller has an incorrect parameter
set.
For information about the alarm delay (Ad) parameter:
l See "alarm delay (Ad)" on page 66
Follow the chart to troubleshoot door open alarms on coolers without a door switch fitted.
ems25+ and ems25advanced / General Use
48 of 89

Table of Contents

Related product manuals