9.3 parameter programming accessories 54
9.4 how to install the drivers on Windows XP 55
9.5 how to install the parameter loader 57
9.6 how to start the parameter loader 59
9.7 how to connect the docking cradle 60
9.8 how to configure the COM port 60
9.9 how to load the parameter settings 62
9.10 how to view the download counter 63
9.11 how to view the version of the parameter programming tool (dongle) 63
9.12 display codes for parameter downloads 64
10 parameter reference 65
10.1 parameters by function 65
10.2 parameter by owners 66
10.3 temperature setting rules 66
10.4 alarm delay (Ad) 66
10.5 activity frequency (AF) 67
10.6 marketing mode (Ar) 67
10.7 buzzer enable (b0) 68
10.8 buzzer duration (b1) 68
10.9 calibration 1 (CA1) 68
10.10 Celsius or Fahrenheit (CF) 69
10.11 refrigeration system failure (Ct) 69
10.12 display stability (d2) 69
10.13 defrost duration (dd) 70
10.14 defrost interval (dE) 70
10.15 differential (dIF) 70
10.16 display (dIS) 71
10.17 delay to saving (dS) 71
10.18 defrost termination temperature (dtd) 71
10.19 freeze-up protection (dtt) 72
10.20 fan cycle off (FCF) 72
10.21 fan cycle on (FCO) 72
10.22 fan set point (FSP) 73
10.23 condenser high temperature (Ht) 73
ems25+ and ems25advanced / General Use
4 of 89
To Next Page
Loading...
