10 MES3000 Ethernet switch series
1 INTRODUCTION
In the last few years, more and more large-scale projects are utilizing NGN concept for
communication network development. One of the main tasks in implementation of large multiservice
networks is the creation of reliable high-performance transport network, that will serve as a backbone in
multilayer architecture of next-generation networks.
For delivering high transfer rates, Gigabit Ethernet (GE) and 10Gigabit Ethernet (10GE) data transfer
technologies are widely used. High-speed data transmission, especially in large-scale networks, requires a
network topology that will allow flexible distribution of high-speed data flows.
MES3000 series switches could be used in large enterprise networks, SMB networks and operator's
networks. They provide high performance, flexibility, security and multi-tier QoS in conjunction with high
reliability provided by the backup of nodes, that enable fail-over operation—power modules and
ventilation modules.
Design versions of MES3000 series switches:
MES3124 24x10/100/1000Base-T ports, 4x10GBaseX(SFP+) or 1000Base-X(SFP) ports;
MES3124F 20x1000Base-X(SFP) ports, 4x10/100/1000Base-T/1000Base-X (SFP) combo ports,
4x10GBase-X (SFP+) or 1000Base-X (SFP) ports;
MES3116 16x10/100/1000Base-T ports, 2x10GBaseX (SFP+) or 1000Base-X (SFP) ports
MES3116F 12x1000Base-X (SFP) ports, 4x10/100/1000Base-T/1000Base-X (SFP) combo ports,
2x10GBase-X (SFP+) or 1000Base-X (SFP) ports;
MES3108 8x10/100/1000Base-T ports, 2x10GBaseX (SFP+) or 1000Base-X (SFP) ports;
MES3108F 4x1000Base-X (SFP) ports, 4x10/100/1000Base-T/1000Base-X (SFP) combo ports,
2x10GBase-X (SFP+) or 1000Base-X (SFP) ports;
MES3224 24x10/100/1000Base-T ports, 2x10GBaseX (SFP+) or 1000Base-X (SFP) ports,
2x10GBase-LR/ER/ZR (XFP) ports;
MES3224F 20x1000Base-X (SFP) ports, 4x10/100/1000Base-T/1000Base-X (SFP) combo ports,
2x10GBase-X (SFP+) or 1000Base-X (SFP) ports, 2x10GBase-LR/ER/ZR (XFP) ports.
This operation manual describes intended use, specifications, first time setup recommendations,
and the syntax of commands used for configuration, monitoring and firmware update of the switch.
To Next Page
Loading...
Need help?
General
