ELTEX MES3108 - Green Ethernet Configuration

MES3000 Ethernet switch series 81
console (config)# interface vlan 1002
console (config)# ip unnumbered vlan 100
5.13 Green Ethernet configuration
Green Ethernet is a technology that allows to reduce the device power consumption by disabling
power supply to unused electric ports and changing levels of transmitted signal according to the cable
length.
Global configuration mode commands
Command line request in global configuration mode appears as follows:
console(config)#
Table 5.58 —Global configuration mode commands
Command
Value/Default value
Action
green-ethernet energy-detect
-/enabled
Enable the power saving mode for inactive ports.
no green-ethernet
energydetect
Disable the power saving mode for inactive ports.
green-ethernet short-reach
-/enabled
Enable the power saving mode for ports, that are used for device
connections with cable length less than the threshold value, set
with green-ethernet short-reach threshold command.
no green-ethernet short-reach
Disable the power saving mode for cable length.
green-ethernet short-reach
threshold value
value: (0..70)/40 meters
Set the threshold value for short-reach power saving mode.
no green-ethernet short-reach
threshold
Restore default setting.
Interface configuration mode commands
Command line request in Ethernet interface configuration mode appears as follows:
console(config-if)#
Table 5.59 —Ethernet interface configuration mode commands
Command
Value
Action
green-ethernet energy-detect
-/enabled
Enable the power saving mode for the interface.
no green-ethernet
energydetect
Disable the power saving mode for the interface.
green-ethernet short-reach
-/enabled
Enable the power saving mode for cable length.
no green-ethernet short-reach
Disable the power saving mode for cable length.
green-ethernet short-reach
force
-/disabled
Enable the power saving mode for the port permanently.
no green-ethernet short-reach
force
Enable the power saving mode for the port permanently.
Privileged EXEC mode commands
Command line request in Privileged EXEC mode appears as follows:
console#
Table 5.60 —Privileged EXEC mode commands
Command
Value
Action
show green-ethernet
gi_port: (1..8/0/1..24);
Show green-ethernet statistics.