ELTEX MES3108 - 5.18.6 Access Lists (ACL) for device management

150 MES3000 Ethernet switch series
Index Description Type Community Owner Last time sent
----- ----------- ---------- ---------- -------- -------------------
1 Errors Log CLINov 10 2009 18:47:17
2 High Broadcast Log-Trap router Manager Nov 10 2009 18:48:48
Table 5.164 —Description of results
Parameter
Description
Index
Index, the unique identifier of the event.
Description
Comment that describes the event.
Type
The type of notification generated by the device for this event:
none—do not create the notification
log—create table record
trap—send SNMP trap
log-trap—create table record and send SNMP trap
Community
SNMP community string for trap transmission.
Owner
User, that created the event.
Last time sent
Time and date of the last event generation. If no events has been generated, this value
will be equal to zero.
 Show RMON remote monitoring record table.
console# show rmon log
Maximum table size: 100
Event Description Time
----- ----------- --------------------
1 Errors Nov 10 2009 18:48:33
Table 5.165 —Description of results
Parameter
Description
Index
Index, the unique identifier of the record.
Description
Comment that describes the event.
Time
Event creation time.
5.18.6 Access Lists (ACL) for device management
MES3000 series switches firmware allows to enable or disable the access to device management via
the specific ports or VLAN groups. Access control lists (ACL) are created for this purpose.
Global configuration mode commands
Command line request in global configuration mode appears as follows:
console(config)#
Table 5.166 —Global configuration mode commands
Command
Value
Action
management access-list name
name: (1..32)
characters
Create access control list. Enter the access control list
configuration mode.
no management access-list
name
Remove access control list.