ELTEX MES3108 - Page 130

130 MES3000 Ethernet switch series
console(config)#
Table 5.136 – Global configuration mode commands
Command
Value
Action
multicast snooping profile
name
name : (1..32)
characters
Enter multicast profile configuration mode.
no multicast snooping profile
name
Remove the selected multicast profile.
To delete the multicast profile, you should untether it
from all the switch ports first.
Multicast profile configuration mode commands
Command line request in multicast profile configuration mode appears as follows:
console(config-mc-profile)#
Table 5.137 – Multicast profile configuration mode commands
Command
Value
Action
match ip low_ip [high_ip]
low_ip: valid multicast
address;
high_ip: valid multicast
address
Define the profile match to the specified IPv4 multicast address
range.
no match ip low_ip [high_ip]
Remove the profile match to the specified IPv4 multicast address
range.
match ipv6 low_ipv6
[high_ipv6]
low_ipv6: valid IPv6
multicast address;
high_ipv6: valid IPv6
multicast address
Define the profile match to the specified IPv6 multicast address
range.
no match ipv6 low_ipv6
[high_ipv6]
Remove the profile match to the specified IPv6 multicast address
range.
permit
-/no permit
If mismatch to one of the defined ranges is found, IGMP reports
will be skipped.
no permit
If mismatch to one of the defined ranges is found, IGMP reports
will be dropped.
Ethernet interface configuration mode commands (interface range)
Command line request in interface configuration mode appears as follows:
console(config-if)#
Table 5.138 – Ethernet interface configuration mode commands (interface range)
Command
Value/Default value
Action
multicast snooping
maxgroups number
number: (1..1000)/-
Restrict the quantity of simultaneously viewed multicast groups
for the port.
no multicast snooping
maxgroups
Remove the simultaneously viewed multicast groups quantity
restriction for the port.
multicast snooping profile
name
name: (1..32)
characters
Tether the selected multicast profile to the port.
no multicast snooping profile
Remove multicast profile match to the port.
EXEC mode commands
All commands are available to the privileged user only.
Command line request in EXEC mode appears as follows:
console#