ELTEX MES3108 - Page 136

136 MES3000 Ethernet switch series
system.
Acct-Terminate-Cause (49)
No
Yes
The reason for closing session.
Nas-Port-Type (61)
Yes
Yes
Show the client port type.
Terminal configuration mode commands
Command line request in terminal configuration mode appears as follows:
console(config-line)#
Table 5.146 —Terminal configuration mode commands
Command
Value/Default value
Action
login authentication {default |
list_name}
list_name: (1..12)
characters
Define the log in authentication method for console, Telnet, SSH.
- default—use default list created by 'aaa authentication login
default' command
- list_name—use the list created by 'aaa authentication login
list_name' command.
no login authentication
Restore the default value.
enable authentication
{default | list_name}
list_name: (1..12)
characters
Define the user authentication method when privilege level is
escalated for console, Telnet, SSH.
- default—use default list created by 'aaa authentication login
default' command
- list_name—use the list created by 'aaa authentication login
list_name' command.
no enable authentication
Restore the default value.
password password
[encrypted]
password: (1..159)
characters
Define the terminal password.
- encrypted—define the encrypted password (e.g. encrypted
password copied from another device)
no password
Remove the terminal password.
Privileged EXEC mode commands
Command line request in Privileged EXEC mode appears as follows:
console#
Table 5.147 —Privileged EXEC mode commands
Command
Value/Default value
Action
show authentication methods
-
Show information on switch authentication methods.
show users accounts
-
Show local user database and their privileges.
clear line line
line: (0..8)
Closes remote management session.
- line - number of remote management session.
EXEC mode commands
Command line request in EXEC mode appears as follows:
console>
All commands from this section are available to the privileged users only.
Table 5.148 —EXEC mode commands
Command
Value/Default value
Action
show accounting
-
Show information on configured accounting methods.