EasyManua.ls Logo

ELTEX MES3108 - Page 138

ELTEX MES3108
243 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
138 MES3000 Ethernet switch series
radius-server source-ipv6
ip_address
-
Define the specific IPv6 address used as the default source address
being sent in RADIUS protocol messages.
no radius-server source-ipv6
[ip_address]
Remove the specific IPv6 address used as the default source
address being sent in RADIUS protocol messages. Define IPv6
switch interface address as the source address for RADIUS
protocol messages.
radius-server attributes nas-id
include-in-access-req format
nas_id
nas_id:
(1..32)/attribute 32 is
absent from requests
by default
Adding attribute 32 (NAS-ID) to RADIUS request packets.
- nas_idoption format
- %h macro substitutes hostname of the switch.
no radius-server attributes
nas-id include-in-access-req
format
Returns the default value.
Privileged EXEC mode commands
Command line request in Privileged EXEC mode appears as follows:
console#
Table 5.150 Privileged EXEC mode commands
Command
Value/Default value
Action
show radius-servers
-
Show RADIUS server configuration parameters (this command is
available to privileged users only).
show radius statistics
-
Show Radius protocol statistics.
Example execution of commands
Set global values for parameters: server reply interval5 seconds, RADIUS server discovery
attempts5, time when unavailable servers will not be polled by the switch RADIUS client
10 minutes, secret keysecret. Add RADIUS server into the list, located in the network node
with IP address 192.168.16.3, server authentication port1645, server access attempts2.
console# configure
console (config)# radius-server timeout 5
console (config)# radius-server retransmit 5
console (config)# radius-server deadtime 10
console (config)# radius-server key secret
console (config)# radius-server host 196.168.16.3 auth-port 1645
retransmit 2
Show RADIUS server configuration parameters
console# show radius-servers
start
IP address Port port Tim Ret- Dead- source IP Prio. Usage
Auth Acct Out rans Time
------------- ----- ----- ------ ----- ------ ---------- ----- ----
192.168.16.3 1645 1813 Global 2 Global Global 0 all
196.168.16.3 1645 1813 Global 2 Global Global 0 all
Global values
--------------
TimeOut : 5
Retransmit : 5
Deadtime : 10
Source IP : 0.0.0.0
Source IPv6 : ::

Table of Contents

Related product manuals