ELTEX MES3108 - Page 178

178 MES3000 Ethernet switch series
{password_string}
attribute. The maximal size of transmitting string - 128 symbols.
no dot1x mac-
authentication format
password
Restore the default value
dot1x radius-attributes
filter-id
-/disabled
Enable authentication based on ACL/assign QoS-Policy.
no dot1x radius-attributes
filter-id
Restore the default value.
dot1x radius-attributes
vlan
-/disabled
Enables Tunnel-Private-Group-ID (81) option processing in RADIUS
server messages.
no dot1x radius-attributes
vlan
Disables Tunnel-Private-Group-ID (81) option processing in RADIUS
server messages.
VLAN configuration mode commands
Command line request in VLAN interface configuration mode appears as follows:
console(config-if)#
Table 5.207 —VLAN interface configuration mode commands
Command
Value
Action
dot1x auth-not-req
Unauthorized user access
is denied by default.
Allow access to the current VLAN for the unauthorized users.
no dot1x auth-not-req
Deny access to the current VLAN for the unauthorized users.
dot1x guest-vlan
VLAN is not configured as
the guest VLAN
Define the guest VLAN.
Allow unauthorized users of this interface to access the guest VLAN.
If the guest VLAN is defined and allowed, the port will automatically
join the guest VLAN when it is unauthorized, and leave the guest
VLAN when it passes authorization. To use these functions, the port
should be a static member of the guest VLAN.
no dot1x guest-vlan
Restore the default value.
Privileged EXEC mode commands
Command line request in Privileged EXEC mode appears as follows:
console#
Table 5.208 —Privileged EXEC mode commands
Command
Value
Action
show dot1x advanced
[gigabitethernet gi_port |
tengigabitethernet te_port]
gi_port: (1..8/0/1..24);
te_port: (1..8/0/1..4)
Show additional information on IEEE 802.1x protocol settings (this
command is available to privileged users only).
EXEC mode commands
Command line request in EXEC mode appears as follows:
console#
Table 5.209 —Privileged EXEC mode commands
Command
Value
Action
show dot1x bpdu
-
Show IEEE 802.1x BPDU port security processing when IEEE 802.1x
disabled globally.