20
LogicMachine is compatible with the following standards:
KNX/EIB TP1, KNXnet/IP
CAN FT
Modbus TCP, Modbus RTU Client/Server
BACnet IP, Client/Server
GSM/3G for Internet access; optionally for sending SMS notifications and controlling the
installation by receiving SMS commands.
Bluetooth 3.0 and 4.0 (through USB modem)
DMX512 (through RS485)
DALI (through RS485 gateway)
1-Wire
AllJoyn
Ekey biometrical access systems (RS485)
HVAC systems can be controller through RS485/Ethernet interface by using scripting
SMTP/Email, SSL
SIP
XML (export object values, alerts or errors; integration with Fidelio)
RSS (read Error or Alert tab content)
JSON, XMPP
MQTT
REDIS
etc.
The system is made so that each of the standards can be used with each other, so LogicMachine
can act as BACnet to DALI gateway or Modbus to GSM etc.