53
4.4. Admin mode: adding/removing/administering apps
Enter admin mode by clicking on Admin icon and entering the password.
Change admin password
Once in admin mode, click on Settings icon and press Change admin password button.
Another setting here is Allow users to show/hide apps which will enable/disable the possibility
to show or hide apps for end-users as shown in 4.3.
Change default page view for users
While in admin mode, do the necessary page adjustments you can change background
texture, hide/unhide/sort apps by using same icons as in user mode (see 4.3)
Once all necessary changes are done, click on Save icon to save the default page.
Add / remove apps
Click on plus icon to enter the administration window of apps. If you see the following
window, make sure you have set correct IP/gateway/DNS settings for your LogicMachine
(System config
Network
Interfaces)
To Next Page
Loading...
Need help?
General
