EasyManua.ls Logo

Embedded Systems LM5p-GSMC - Enocean Transmitter Configuration; Enocean Interfaces; Enocean to KNX Mapping

Default Icon
291 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
241
17. EnOcean transmitter configuration
LogicMachine5 Reactor GSM supports EnOcean through USB gateway which is based on
product USB 300 (OEM), delivered by EnOcean organization as OEM product to 3rd parties.
Note that different frequencies are used for EnOcean (based on geographical region). Be
careful and select the proper USB gateway for your location.
EnOcean frequencies:
868 MHz Europe
902 MHz USA / Canada
928 MHz Japan
2.4 GHz Worldwide usage

USB master devices to EnOcean based radio products. It is equipped with a TCM 310
transceiver gateway module. It provides bidirectional EnOcean radio and bidirectional serial
interface via USB. Radio messages are sent and received via an externally connected USB host.
17.1. EnOcean interfaces
EnOcean interface Base address can be found in Enocean
Interfaces tab.
17.2. EnOcean to KNX mapping
All telegrams received from EnOcean devices appears in Enocean
KNX section.
Once some specific device has to be mapped to KNX, the corresponding row has to be clicked
and profile has to be chosen. There are all main profiles predefined in the list.

Table of Contents

Related product manuals