Embedded Systems LM5p-GSMC User Manual

73
6.1.6. Input: Step dimmer (1 byte)
 Name  name of the port
 Link to object  group address to link the object with. By pressing the button, the
field will be automatically filled with the next free group address.
 Lock object  lock object group address
 Write to bus  defines either to write or not to bus on value change
 Mode  port operating mode
 Dimmer step (% ) value on which the brightness value will change by one step
 On preset (%)  brightness preset when getting in On state
 Midpoint voltage  voltage midpoint to determine the On/Off state
 Input hysteresis (V) – If binary input is OFF, it will change to ON when voltage level is
above MIDPOINT + HYSTERESIS. If binary input is ON, it will change to OFF when
voltage level is below MIDPOINT  HYSTERESIS
 Comments  comment of the object

Embedded Systems LM5p-GSMC Specifications

General

Brand	Embedded Systems
Model	LM5p-GSMC
Category	Dimmer
Language	English