Embedded Systems LM5p-GSMC User Manual

30
 Press Rescan button and then choose from the drop down menu found
LogicMachine
 Press OK
 Back in Options  Communication window select newly created interface as
Communication Interface from the drop-down menu.
 To test the communication with ETS, press Test button.
 Make sure that bus status is Online  press button in ETS.
3.10. KNX and IP Router settings
KNX specific configuration is located in System configuration  Network  KNX connection
window.

Embedded Systems LM5p-GSMC Specifications

General

Brand	Embedded Systems
Model	LM5p-GSMC
Category	Dimmer
Language	English