Embedded Systems LM5p-GSMC User Manual

31
General tab
 Mode [ TP-UART / EIBnet IP Tunneling / EIBnet IP Tunneling(NAT mode) / EIBnet IP
Routing]  KNX connection mode. LogicMachine5 has TPUART interface by default built-
in. Note! If there is no KNX TP connected to the device, it will automatically offer to
switch to KNXnet/IP mode.
 ACK all group telegrams  acknowledge receipt of telegram to all group communication
 ParameterKNX corresponding interface in OS of the system
 KNX address  KNX physical address of the device
 KNX IP features  Use this device with KNX IP features e.g. for KNXnet/IP network
configuration
 Multicast IP  multicast IP address
 Multicast TTL  Time to live for multicast telegram in seconds
 Maximum telegrams in queue  count of maximum telegrams in the queue
IP > TP filter
Filtering table for telegrams going from IP network to KNX TP1 is located in this submenu.

Embedded Systems LM5p-GSMC Specifications

General

Brand	Embedded Systems
Model	LM5p-GSMC
Category	Dimmer
Language	English