Embedded Systems LM5p-GSMC User Manual

68
6.1. Reactor
Reactor IO configuration and mapping to KNX is done under Reactor tab. No additional
software is needed to configure KNX mapping of IO ports.
6.1.1. Universal input/output
You can set up Universal I/O port as binary output, voltage input, binary ON/OFF input, binary
SHORT/LONG input, Step dimmer 1 byte, Relative dimmer 4 bit, Pulse meter and Frequency
meter.

Embedded Systems LM5p-GSMC Specifications

General

Brand	Embedded Systems
Model	LM5p-GSMC
Category	Dimmer
Language	English