Embedded Systems LM5p-GSMC User Manual

74
6.1.7. Input: Relative dimmer (4 bit)
 Name  name of the port
 Short press object  group address to link the object with on short press. By pressing
the button, the field will be automatically filled with the next free group address.
 Long press object – group address to link the object with on long press. By pressing
the button, the field will be automatically filled with the next free group address.
 Lock object  lock object group address
 Write to bus  defines either to write or not to bus on value change
 Mode  port operating mode
 Midpoint voltage  voltage midpoint to determine the On/Off state
 Input hysteresis (V) – If binary input is OFF, it will change to ON when voltage level is
above MIDPOINT + HYSTERESIS. If binary input is ON, it will change to OFF when
voltage level is below MIDPOINT  HYSTERESIS
 Comments  comment of the object

Embedded Systems LM5p-GSMC Specifications

General

Brand	Embedded Systems
Model	LM5p-GSMC
Category	Dimmer
Language	English