Embedded Systems LM5p-GSMC User Manual

33
TP > IP filter
Filtering table for telegrams going from KNX TP1 to IP network is located in this submenu.
 Apply filter to virtual objects  either to apply filter policy to objects added in
Objects tab as virtual objects without attraction to bus
 SRC policy [No filter / Accept selected individual addresses / Drop selected individual
addresses] policy to apply to the list of source individual addresses
 Ind. address list  list of individual addresses. One address/range per line. Use * (e.g.
1.1.* ) to filter all addresses in the given line.

Embedded Systems LM5p-GSMC Specifications

General

Brand	Embedded Systems
Model	LM5p-GSMC
Category	Dimmer
Language	English