4 Perform a Test
Common Mode
Coupling of a single line to High and Low to PE. Coupling of multiple lines to PE is possible
too. See the technical data for details.
4 EUT
Connect the EUT to the output of the CDN.
5 Auxiliary Equipment
Connect the auxiliary equipment (AE) to the input of the CDN. The AE is protected with the
internal line impedance of the CDN.
4.6 Slow DOW Test on Unshielded and Symmetrical Interconnection Lines
4.6.1 Coupling using CDN-DOW-DATA-HF according to IEC 60255-26
1
2 3
4
5
6
7 8
1 Generator
Select the Slow DOW test and the CDN-DOW-DATA-HF as coupling device with the desired cou-
pling type.
A missing coupling device in the parameter list can be added in the generator main menu.
Page 23/55
To Next Page
Loading...